top view looking down
Viewed: 1332 times.
|
6mm Tufnol fins attached using 5mm cap heads. the edges are machined to 2mm thick over 50mm
Viewed: 1267 times.
|
Close up of fins bolted on
Viewed: 1221 times.
|
more of fin attachment
Viewed: 1051 times.
|
DSCF4726
Viewed: 921 times.
|
4k in ll1
Viewed: 1151 times.
|
4k in ll2
Viewed: 982 times.
|
4k in ll3
Viewed: 1045 times.
|
4k in ll4
Viewed: 1000 times.
|
4k in ll5
Viewed: 1025 times.
|
4k in ll6
Viewed: 1032 times.
|
4k in ll7
Viewed: 975 times.
|
4k in ll8
Viewed: 1052 times.
|
4k in ll9
Viewed: 1002 times.
|
4k in ll10
Viewed: 985 times.
|
End view of fin clamps. Note the inside has been machined to match the outside diameter of the body tube
Viewed: 1073 times.
|
4k in ll12
Viewed: 939 times.
|
4k in ll13
Viewed: 1036 times.
|
4k in ll14
Viewed: 990 times.
|
4k in ll15
Viewed: 1040 times.
|
4k in ll16
Viewed: 1001 times.
|
4k in ll17
Viewed: 940 times.
|
View of fin clamps located in the main body. These position the clamps in the correct place and also aid attacment. The fin clamp was drilled and stainless steel wire was used to bind the clamp to the 6mm threaded rod in the main airframe.
Viewed: 1095 times.
|
DSCF4408
Viewed: 1244 times.
|
DSCF4409
Viewed: 967 times.
|
DSCF4416
Viewed: 966 times.
|
DSCF4417
Viewed: 897 times.
|
DSCF4418
Viewed: 1034 times.
|
Nox and Gox manifold parts ready for build up. They are for the 4 fill stems. 1 manifold is for NoX the other for Gox.
Viewed: 1002 times.
|
GSE built up. needs 1 more fill stem
Viewed: 981 times.
|
